General HAM

ID #1026

Disable Wires FT-60

FT-60
1. Press the F/M key then immediately press the 0 key to enter the menu mode. – See manual page 49
2. Rotate the Dial knob to menu 23 – INT MR.
3. Press the F/M key then rotate the Dial knob to select a memory (d1 through d9) that is empty, i.e. it contains •••••• (six dots) = no tone.
4. Press the F/M key to store the setting.
5. Rotate the Dial knob to menu 21 – I NET.
6. Press the F/M key then rotate the Dial knob to select INT.MEM.
7. Press the F/M key to store the setting.
8. Press the PTT button to exit the menu mode.
To re-enable the WIRES ? mode, select INT.COD in menu 21.

Tags: -

Related entries: -

Last update: 2012-10-31 05:05
Author: Marcus
Revision: 1.0

Digg it! Share on Facebook Print this record Send FAQ to a friend Show this as PDF file
Propose a translation for Propose a translation for
Please rate this FAQ:

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

You cannot comment on this entry